• Large .8" LCD display with back light
• Powered with rechargeable battery or wall adapter
• Power save feature for 700 hours of battery life
• Two setpoints with delay and timer selections
• Three digital inputs
• Ten stored tare values
• Display hold (based on 3 second average)
• Body mass index (BMI) function
• Time and date (volatile)

120 Plus - Approvals pending

Specifications

POWER: Line voltages: 115 or 230 VAC
Frequency: 50 or 60 Hz
120 Plus Power consumption:
(estimated battery life)
60 hours with 1 x 350 ohm
40 hours with 4 x 350 ohm
Charge time 8 hours
Excitation Voltage: 5 VDC,
4 x 350 ohm or 8 x 700 ohm load cells
Analog signal input range: -0.6 mV/V - 3.0 mV/V
Analog signal sensitivity:0.3 ìV / graduation minimum,
1.5 ìV/grad recommended resolution:
Internal resolution: 1 million internal graduations
Display resolution:10,000 displayed graduations
Measurement rate: 30, 15, 7, 3 per second *30 per second
System linearity: Within 0.01% of full scale
Circuit Protection: RFI, EMI, ESD protected
Serial Output: EDP port: Full duplex RS-232
Printer port: Output-only RS-232 or active 20 mA current loop
Both ports: 9600, 4800, 2400, 1200, 600, 300 bps; 7 or 8 data bits; even, odd or no parity
Update rate: 15 times/seconds
Display: 0.8" (20 mm), 6-digit Super Red
Light Emitting Diode (LED) display,
7-segment, digits *0.8" (20 mm) 6-digit LCD with backlight
7-segment digits
Status annunciators: Designators for: center of zero,stand still, gross, net center of zero, standstill, lb, kg, oz, g
*Battery, setpoint 1 & 2 BMI, HI-0KLO, Hold
Keyboard: 5-key flat membrane panel,
tactile feel *zero, tare, present tare, hold, BMI,
units, numeric 0-9, clear, enter
Operating temperature: -10°C to 40°C/14°F to 104°F (legal)
-10°C to 50°C/14°F to 122°F (industrial)
weight: 2.6 lb (1.2 kg)
Rating/Material: Enclosure: heavy gauge ABS
Approvals: 120 Plus - Approvals pending